? semiconductor components industries, llc, 2014 june, 2014 ? rev. 4 1 publication order number: HBL21000/d HBL21000rp product preview 1-channel esd protector product description the HBL21000rp provides robust esd protection for sensitive parts that may be subjected to electrostatic discharge (esd). the tiny form factor and single wirebond requirement enables it to be used in very confined spaces. the electrical ?back?to?back zener? configuration also provides esd protection in cases where nodes with ac signals are present. this device is designed and characterized to safely dissipate esd strikes of at least 8 kv, according to the mil?std?883 (method 3015) specification for human body model (hbm) esd. features ? compact die protects from esd discharges ? almost no conduction at signal amplitudes less than 4 v ? esd protection over 8 kv contact discharge per mil_std_883 international esd standard applications ? led lighting ? modules ? interface circuits aluminum (al) pad on the topside gold?tin (ausn) on the backside figure 1. electrical schematic this document contains information on a product under development. on semiconductor reserves the right to change or discontinue this product without notice. http://onsemi.com see detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. ordering information
HBL21000rp http://onsemi.com 2 current/voltage graph symbol description i cl+ positive clamping current v cl+ positive clamping voltage i l2+ leakage current at v l2+ v l2+ voltage condition: +14v i l1+ leakage current at v l1+ v l1+ voltage condition: +4v i cl? negative clamping current v cl? negative clamping voltage i l1? leakage current at v l1? v l1? voltage condition: ?4v note: the polarity in the above graph corresponds to the polarity convention shown in the application diagram. figure 2. ordering information ordering part number topside metal backside metal thickness shipping method HBL21000rp al ausn 4 mils ring pack absolute maximum ratings parameter rating unit operating temperature range ?40 to +150 c storage temperature range ?65 to +150 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. standard operating conditions parameter rating unit operating temperature range ?40 to +150 c
HBL21000rp http://onsemi.com 3 electrical operating characteristics (see note 1) symbol parameter test conditions min typ max unit i leak leakage current v = 4 v, 150 c (note 2) v = 4 v, 25 c (v l1 ) v = +14 v, 25 c (v l2+ ) 4.0 0.3 (i l1 ) 0.5 (i l2+ ) ma a a v cl signal clamp voltage positive polarity on signal node (v cl+ ) negative polarity on signal node (v cl? ) t a = 25 c; at 10 ma (i cl+ ) at ?10 ma (i cl? ) +16 ?9.0 +19 ?7.0 +22 ?5.0 v v esd esd protection ? withstand voltage: human body model (mil?std?883, method 3015) t a = 25 c (note 2) 8 kv 1. operating characteristics are over standard operating conditions unless otherwise specified. 2. this parameter is guaranteed by design and/or characterization. mechanical details mechanical specifications parameter condition unit composition silicon wafer, p+ doped die shape square length (sawn) 200 m width (sawn) 200 m thickness 4 mils top pad length 125 m top pad width 125 m top pad composition al (aluminum) back metal (underside) ausn (gold?tin) dimensions diagram figure 3. die dimensions sawn die size: 200 m x 200 m top pad opening: 125 m x 125 m on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other inte llectual property. a listing of scillc?s pr oduct/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typical s? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 HBL21000/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative
|
